AMT Pangaea ULTIMA U-2

• TUNER;
• METRONOME;
• [NG] Noise Gate – Global settings / by each preset);
• [CM] Compressor;
• [PH] Phaser;
• [FL] Flanger;
• [PR] Preamp – analog-digital preamp section (Clean / Crunch / Lead);
• [PA] PowerAmp – 15 types of virtual Power Amps;
• [IR] CabSim – 1 WAV IR for both L/R channels per preset; IR/Dry parameter for mixing the processed and Dry signal;
• [EQ] Equalizer – parametric Pre/Post EQ;
• [FT] Filters – Hi/Low pass filters with Q-factor settings + Presence;
• [FX] DL/RV – Delay or Reverb per preset
• + rich switching capabilities (2-Preamps Bricks Mode, up to 2 external 2-button Footswitches, Expression pedal, MIDI, etc.)

• Noise Gate (global setting)
• [WH] Wah
• [CM] Compressor
• [PH] Phaser
• [FL] Flanger
• [CH] Chorus
• [DL] Delay
• [TR] Tremolo
• + rich switching capabilities (up to 2 external 2-button Footswitches, Expression pedal, MIDI, etc.)
• + other features

• IR Stereo cabsim (2 IR’s per preset: the first WAV IR for the LEFT channel, another one WAV IR – for the RIGHT channel)
• Parametric Pre/Post EQ
• [FT] Filters – Hi/Low pass filters + Presence;

• Gold Reverb
• Hall
• Room
• Plate
• Spring
• Gate
• Reverse

• TUNER;
• METRONOME;

PRE section:

• [NG] Noise Gate – Global settings / by each preset;
• [WH] Wah – full-range flexible wah-wah effect;
• [CM] Compressor.

PRE/POST section (depend on your choice):

• [PH] Phaser (Pre/Post);
• [FL] Flanger (Pre/Post);

POST section:

• [IR] CabSim – 1 WAV IR for both L/R channels per preset; IR/Dry parameter for mixing the processed and Dry signal;
• [EQ] Equalizer – parametric EQ;
• [FT] Filters – Hi/Low pass filters;
• [FX] DL/RV – Delay or Reverb per preset
• + rich switching capabilities (2-Preamps Bricks Mode, up to 2 external 2-button Footswitches, Expression pedal, MIDI, etc.)
• + other features

• TUNER;
• METRONOME;
• [NG] Noise Gate – Global settings / by each preset;
• [WH] Wah – full-range flexible wah-wah effect;
• [CM] Compressor (Pre/Post mode);
• [FX] PH/CH – Phaser or Chorus per preset;
• [IR] CabSim – 1 WAV IR for both L/R channels per preset; IR/Dry parameter for mixing the processed and Dry signal;
• [EQ] Equalizer – parametric Pre/Post EQ;
• [FT] Filters – Hi/Low pass filters with Q-factor settings + Presence;
• [FX] DL/RV – Delay or Reverb per preset;
• + rich switching capabilities (2-Preamps Bricks Mode, up to 2 external 2-button Footswitches, Expression pedal, MIDI, etc.)
• + other features

IN L, IN R – Inputs of the Left and Right channels:
– input impedance 470 kОм
– rated input voltage of audio signal 0.316Vrms (-10dBV)
– maximum sinusoidal voltage 2.5V (+8dBV)

AUX IN
– Input impedance 2kOhm
– maximum sinusoidal voltage 0.85V (-1.4dBV)

OUT L, OUT_R – Outputs of the Left and Right channels:
– output impedance 1,5kOhm (unbalanced output)
– maximum sinusoidal voltage 2,6V (unbalanced output)
– phantom power protection – present

PHONES – Output to headphones:
– minimum headphone impedance 32 Ohm
– maximum output sinusoidal voltage (no load) 2,6V (8dBV)
– output impedance 12 Ohm

POWER
– Voltage DC 12V
– Current consumption Approx. 300mA

CHARACTERISTICS OF IR FILES
– Type: WAV, IR A/D – D/A converters 24 bit
– Sampling frequency: 48 kHz
– IR length: 1024 samples (21.3 msec)

– S/N: 115dB.
– Latency: 1.2 ms / 0.0012 s
– Codec: AD\DA AK4621

DIMENSION (HxWxD) 47mm x 55mm x 95mm

WEIGHT 270 g (without package)