AMT EX-10F-II

AMT EX-10F-II – mini expression pedal/futswitch

Features overview

EX-10F-II — this is a versatile two-in-one device that combines the functionality of an expression pedal and a classic footswitch.

IMPORTANT NOTE

• Before using this pedal connected to the device (like guitar processor, etc.), it must be calibrated firstly. That is, such device should provide the User with the ability to configure the calibration of the connected external expression pedal (for example: «Set Max/Set Min»).
• In case if your guitar device (like guitar processor etc.) have no any internal possibility of calibration the external expression pedal (or if you will avoid calibrating the pedal before using), the EX-10F-II probably will control your device somehow, but not in the right way. It can’t be fixed in another way except by calibrating the EX-10F-II by your the device (like guitar processor etc.).
• Even provided that your device supports operation with a 10 kOhm potentiometer’s external expression pedal, the calibration is a prerequisite for proper operation and compatibility of the EX-10F-II with your device.

AMT EX-10F-II characteristics

• Potentiometer 10kOhm
• Unlike its predecessor (the AMT EX-50 expression pedal) the new product has significantly increased the range of pedal movement (by 25-30%). The device can be powered from any AC/DC power supply in the voltage range from 9 to 18 volts.
• When used in expression pedal mode, the EX-10F-II contains on-board TRS and TS outputs for controlling two devices simultaneously, as well as an INVERTED and NORMAL parameter switch.
• The main feature of the new product is the possibility of simultaneous use of the device not only as an expression pedal, but also as a footswitch*. A special switch is provided on the side panel of the device, allowing the user to select one of two operating modes**: the Momentary footswitch (M) and the Latch footswitch (L).
• In addition, the EX-10F-II pedal housing has an LED indication of footswitch operation, depending on the selected mode.
• A reliable proven circuit, a durable metal case, as well as small dimensions make the novelty an indispensable accessory both when working with guitar equipment and with any other devices where it is possible to control parameters from the outside through the expression pedal and / or footswitch.
• Compact size : 55 x 62 x 110 mm
• Strong metal body
• Weight: 0,45 kg

*ATTENTION! Depending on the type of switching used in an external guitar device (for example, a guitar processor), one of two types of cable can be connected to the F.SWITCH M/L OUTPUT of the EX-10F-II pedal:1) TRS connector (stereo) Jack 6.3
2) TS connector (mono) Jack 6.3

**IMPORTANT! To understand exactly which type of cable and connection mode is suitable for you, please carefully read the user manual for your device (for example, a guitar processor) to which you plan to connect the EX-10F-II pedal.